DIY Mud Motor Kit - 5HP - 7HP

Product Description

CLP is the leading manufacturer of Thailand Long Tails.  CLP is an engineering company that has perfected the design of the Long Tail.  Their design is the most efficient on the market.   They use high grade, polymer and metal alloy bushings unlike the competition which uses wood bushings.  The shaft is mounted to the engine with a perfect, direct fit through the use of an adapter that has splines.   The result of these features creates less vibration or power loss.  The power is transferred to the prop in the most direct and efficient way.  CLP has worked with Beaver Dam Mud Runners to develop a heavy duty Thailand Long Tail for the North American Market.  See our parts list below to see why our kit is the toughest and best on the market.

Our Kits are Certified by Honda and designed for the GX Series Engines.

Other brands fit these kits- Harbor Freight Predator, Home Depot Lifan, Briggs, Kohler Duromax, Carrol Stream, Etc. 
 
Go Devil 6.5HP($2000 motor) vs our 6.5HP

Video of 15ft River Hawk and 6.5 CLP going through mud,weeds, logs and stumps: CLICK HERE
 
Video of 16 X 48 Jon Boat and 13HP Honda going through mud,weeds, logs and stumps: CLICK HERE
 
See how easy these are to assemble.  No welding required.  Everything Bolts together: CLICK HERE

Kits include a heavy duty metal alloy end bushing, heavy duty internal bushings, angled handle, squeeze type throttle, high quality kill switch and a spare prop (over a $150 value)-

(kit does not include a prop guard- they cost $40 extra)

More Pictures Here:  http://s30.photobucket.com/user/beaverdammudrunners/library/

Parts included in Kit:

  • -Coupler Assembly with Grease Zerk Fitting- we don't use wing nuts because you should always carry a crescent wrench to change props.(helps keep you from forgetting it)  However, we send extra bolts in the kit that have wing nuts(can be used with the transom or with coupler) We also have a 3rd bolt that goes through the outer shaft- this is a precaution in case the two bolts on top aren't tight.
  •  
  • -Safety Kill Switch And Eye Bolt to Mount it- we use a high quality kill switch with thick hard plastic that lasts a long time in the sun - also has a button that enables you to cut the engine off without reaching down to the engine or pulling the lanyard loose
  •  
  • -ANGLED/BENT Handle w/ NEW SQUEEZE TYPE Throttle Control and Cable- Galvanized - Allows you to stand up or sit down when running the motor- (we offer straight handles by request also) - You can adjust the height of the handle by tilting it left or right.  Most jon boats have a rear seat that gets in the way of maneuvering the motor with a straight handle.  We suggest getting a bent handle- If you don't like it, buy a piece of pipe at the hardware store for a straight handle.  Most people like the adjustable bent handle.
  •  
  • -85" Galvanized Heavy Duty Shaft-  Three grease fittings - We Don't Use Wood Bushings like others.  We only use High Grade Polymer and Metal Alloy Bushings.  Our end bushing is a metal alloy because weeds and fishing lines can easily burn up a plastic end bushing.  Some companies offer upgraded shafts and bushings for an extra price but all of our shafts are heavy duty and designed for a variety of environments including saltwater. Our shaft and shaft housing is thicker than our competition.  -  if you want a 65in or 100in Shaft, please call us- We don't recommend 65in shafts but we offer them.  We recommend 100in shafts for taller, 20in transoms.
  •  
  • -Engine and Throttle Handle Bracket- Heavy Duty Thick Steel with Bushings and Grease Fittings- Option for right or left hand steering- We use heavy duty tubes with large bolts to secure the handles to the engine bracket unlike our competition that uses two small separate brackets with small bolts.
  •  
  • -Two 6.5in Aluminum Surface Piercing Props
  •  
  • -Heavy Duty Transom Bracket- Best and Largest on the market-  Thick steel with Grease Fitting- 3.75in tall, 7in wide
  • -Video on Transom Brackets- https://youtu.be/OA7QMKVzk-E
  •  
  • -All hardware needed for assembly except the engine
-The only parts you will need to purchase will be wiring for the Sea Dog Safety Kill Switch.  However, we highly recommend you purchase our new wiring harness:                  
  New Wiring Harness    It is "Plug and Play" and makes it very easy to wire the kill switch.
 

Our kits have gone through extensive testing by Honda in the USA and are certified by Honda to work with a GX200 (both in the USA and Thailand)

Engine Specification Requirements for 5 - 7HP

 
The specs or measurements need to be the same as the Honda GX160 or GX200
 
Here are some examples of some engines that will fit our kits:

Briggs 205cc models: 122032-0536-B8, 122037-0550-B8
Carroll Stream Engines: 5.5hp, 6.5hp
Duromax 7hp XP7HP, XP7HPE
Harbor Freight: 6.5hp Predator 212cc
Home Depot: 6.5hp Lifan 196CC models: LF168F-2BQ, LF168F-2BDQ
Honda 5.5hp GX160 models: GX160UT1QX2, GX160UT1QXP2, GX160UT1QXC9
Honda 6.5hp GX200 models: GX200UT2QX2, GX200UT2QXE2
Kohler 6.5hp SH265-0011, 7hp CH270-0103, CH270-3011, CH270-3031, CH270-3105

WE ALSO ACCEPT PAYPAL - EMAIL US AT info@beaverdammudrunners.com TO USE PAYPAL

Price: $449
Product Code: DB-M-8

Quantity:

Product Reviews - Add Your Review

Great product and customer service

Reviewed by: Kevin S. on 10/04/2015
Rating: 5 out of 5

I can't say enough about the performance of the motor kit. These things go every where! I mean every where, through the weeds and in 4" of water. Very surprised at the speed as well. With a 6.5hp pushes 2 guys in a 12 boat no problem. CUSTOMER SERVICE is what really sold me tho. They sent me the kit in the mail but before I put it together they realized I was sent a coupler that was missing a manufacturing hole. They immediately called and said they were sending the right one and Ask if I needed it shipped next day. They also included an extra prop for the inconvenience. I'm a very happy customer!

See all reviews for this product